Sony PMW-300K1 Operating Instructions Manual page 108

OTHERS
Menu items
Fan Control
Setting the fan
control mode
RM/USB A Sel
Setting the target
source for external
power supply
Version
Showing the
version of this unit
Version Up
Updating this unit
Menu Scroll
Setting the menu
scroll operation
1)
If recording/playback cannot be made with an SxS
memory card because it has been operated with a
device other than this camcorder, or for some other
reason, updating the managerial file on the card may
improve the situation.
108 Setup Menu List
Subitems and setting values Contents
Wireless Mode
802.11b / 802.11g / 802.11n
Wi-Fi
Enable / Disable
Wi-Fi Remote
On / Off
Setting
Auto / Off in Rec
Setting
Off / Remote / USB A
Vx.xx
Execute / Cancel
Normal / Loop
Display an IEEE802.11 standard.
Select whether to enable or disable Wi-Fi connection.
Select "On" when using the Wi-Fi remote commander.
Note
Unselectable when "Wi-Fi" is set to "Disable."
Set the fan control mode.
Auto: Controls the fan automatically in response to changes
in temperature.
Off in Rec: Turn off the fan while recording. (If temperature
is excessively high, the fan is turned on automatically.)
Set the target source for external power supply.
Off: Turns off this function.
Remote: REMOTE connector
USB A: USB connector (type A)
Notes
• When you set to "Remote" or "USB A," no signal can output
from the VIDEO connector in this setting.
• When you set to "Remote" or "USB A," the character
information cannot be output regardless of the "SDI/HDMI/
Video Out Super" setting.
The current software version of the camcorder is displayed.
Select "Execute" to update the camcorder.
Use when updating is required.
Note
This item cannot be selected when no SxS memory card has
been loaded.
Select the method for menu scrolling.
Normal: The cursor moves and stops at the top or the bottom.
Loop: The cursor continues moving up (jumping from the top
to the bottom) or down (jumping from the bottom to the
top).
2)
When you copy an SxS memory card including
multiple clips and files to another card with the same
capacity, all the clips and files may not be copied
completely to the end, depending on the usage
conditions or memory properties.