Sony PMW-300K1 Operating Instructions Manual page 63

Slot(B)" in "Plan.Metadata" (page 105) in the
OTHERS menu.
UDF: General/Sony/Planning
FAT: BPAV/General/Sony/Planning
To use a USB flash drive (in UDF mode)
Before operation, select "USB A" in "RM/USB A
Sel" of the OTHERS menu.
Notes
• No signal can output from the VIDEO connector in this
setting.
• The character information cannot be output regardless
of the "SDI/HDMI/Video Out Super" setting.
1
Connect a USB flash drive formatted
with the FAT32 file system to the USB
connector (type A) (page 34).
A file list appears.
Note
The file list displays up to 64 files.
Even if the total number of planning metadata files is 64
or less, all of the planning metadata files may not appear
if the directory where they are located on the USB flash
drive (General/Sony/Planning) contains 512 or more
files.
2
Using the joystick or the jog dial, select
the file which you want to load in the file
list, then press the SEL/SET button or
the jog dial.
Confirming the detailed information in planning
metadata
After loading a planning metadata file into
memory of the camcorder, you can check the
details of the file, such as the filename, time and
date of file creation, and the titles specified in the
file.
Select "Properties" in "Plan.Metadata" (page
105) in the OTHERS menu, then select
"Execute."
Using the Wi-Fi connection
When connecting the unit with a computer via
Wi-Fi, the file transmission can be done accessing
the unit's Web menu from a computer.
1
Launch the browser and input http://
<camcorder's IP address> (page 106) in
the address bar.
Example: When the IP address is
192.168.1.10, input http://192.168.1.10 in
the address bar.
2
Input the user name and password, then
click OK.
User name: admin
Password: (your unit's model in lowercase;
pmw-300)
Clearing the loaded planning metadata
To clear the planning data loaded in the
camcorder's memory, proceed as follows:
Select "Clear" in "Plan.Metadata" (page 105) in
the OTHERS menu, then select "Execute."
Defining a clip name in Planning
Metadata
The following two types of clip name strings can
be written in a planning metadata file.
• ASCII-format name, which is displayed on the
viewfinder screen
• UTF-8-format name, which is actually
registered as the clip name
You can select the type for displaying the clip
name with "Clip Name Disp" in "Plan.Metadata"
(page 105) in the OTHERS menu.
When you specify a clip name in planning
metadata, the name is displayed under the
operation status indication on the viewfinder
screen.
Example of clip name strings
Use a text editor to modify the description for the
<Title> tag.
The shaded fields in the example are clip name
strings. "Typhoon" is described in ASCII format
(up to 44 characters).
"Typhoon_Strikes_Tokyo" is described in UTF-8
format (up to 44 bytes).
Here, "sp" indicates a space, and 3 indicates a
carriage return.
<?xml version="1.0" encoding="
sp sp
UTF-8"?>3
<PlanningMetadata xmlns="http://
sp
xmlns.sony.net/pro/metadata/
planningmetadata" assignId="
sp
P0001" creationDate="
sp
2011-08-20T17:00:00+09:00"
lastUpdate="
2011-09-28T10:30:00+09:00"
version="1.00">3
<Properties propertyId="
sp
assignment" update="
sp
2011-09-28T10:30:00+09:00"
sp
sp
sp
Useful Functions 63