Sony PMW-300K1 Operating Instructions Manual page 56

PICTURE PROFILE SET
Items
Multi Matrix
Makes settings related to
multi-matrix correction.
(Unselectable when "Color
Correction" is selected in the
Multi Matrix mode)
Color Correction
Adjusting the color phase in
a specific area (Unselectable
when "Multi Matrix" is
selected in the Multi Matrix
mode)
56 Useful Functions
Subitems and setting values Contents
Setting
On / Off
1)
Area Indication
On / Off
2)
Color Detection
Execute/Cancel
Axis
B / B+ /MG- / MG / MG+ / R /
R+ / YL- / YL /YL+ / G- / G /
G+ / CY / CY+ / B-
Hue
–99 to +99 (±0)
Saturation
–99 to +99 (±0)
Setting
On / Off
2)
Area Detection
Execute/Cancel
1)
Area Indication
On / Off
Target Phase
0 to 359 (130)
Target Width
0 to 90 (40)
Level
–99 to +99 (±0)
Phase
–99 to +99 (±0)
Set to "On" to enable the multi-matrix correction,
which allows specific colors to be selected for
saturation correction in a 16-axis hue space.
Set to "On" to display a zebra pattern in the areas of
the specified color for multi-matrix correction.
Execute to detect the target color on the screen for
multi-matrix correction.
Specify a color targeted by multi-matrix correction
(16-axis mode).
Set the the hue of the color targeted by multi-matrix
correction for each 16-axis mode.
Adjust the saturation of the color targeted by multi-
matrix correction for each 16-axis mode.
Set to "On" to enable the color phase adjustment
for a specific area. (Simultaneous adjustment of
multiple areas is not allowed. You can adjust it for
one area only.)
Execute to detect the color in the center of the
screen. The area centering around the detected
color of the range specified by "Target Width"
becomes the target area of Color Correction.
Set to "On" to display the Zebra 1 pattern for the
area targeted for Color Correction.
Note
The area where the Zebra 1 pattern is displayed and
the area targeted for Color Correction, may differ.
Manually adjust the center color for the area
targeted for Color Correction.
Note
When Area Detection is executed, this setting is
overwritten by the Area Detection result. Perform
fine adjustment with this item as required.
Set the width of color phase for the area targeted for
Color Correction.
Set the saturation for the color in the target area.
Adjust the hue for the color in the target area.