Sony PMW-300K1 Operating Instructions Manual page 97

TC/UB SET
Menu items Subitems and setting values Contents
TC Format DF / NDF
Setting the time
code format
Video formats Frame
setting
59.94i 00 to 29
59.94P
29.97P
1)
23.98P
SP 1440×1080/
23.98P
HQ 1280×720/
23.98P
23.98P
00 to 23
HQ 1920×1080/
23.98P
HQ 1440×1080/
23.98P
HQ 1280×720/
23.98P
HD422 50/1080/
23.98P
HD422 50/720/
23.98P
50i 00 to 24
50P
25P
Set the timecode format.
DF: Drop frame
NDF: Non drop frame
Note
The current video format/frame frequency determines
whether the mode is fixed either to DF or NDF (see below),
regardless of the TC Format setting.
1)
With DF, the frame digits can be set as desired in the range
TC Format
of 00 to 29.
With NDF, the frame at the beginning of recording is
DF/NDF limited to 00, 05, 10, 15, 20, or 25.
2)
switchable The frame digits in "Setting" is limited to 00, 04, 08, 12, 16,
(Fixed to DF in and 20.
Clock mode) The frame at the beginning of recording is limited to 00, 04,
08, 12, 16, or 20.
As "23.98P Output" (page 91) in the VIDEO SET menu
becomes 2-3 pull-down 59.94i when recording (or standing
by to record) HQ 1920×1080/23.98P other than when
"23.98PsF" is selected, the overlapping timecodes of frames
2) 3)
Fixed to NDF
output from the SDI OUT connector are renumbered from
00 to 29.
3)
Even in Clock mode, the timecode is gradually shifted,
because it is counted by NDF.
As output from the SDI OUT connector becomes 2-3
pulled-down video when recording (or standing by to
record) HQ 1920×1080/23.98P and other than "23.98PsF"
is selected for "23.98P Output" (page 91) in the VIDEO
SET menu, fields are created in which overlapping
timecodes are displayed on the screen.
Fixed to NDF
Setup Menu List 97