Sony PMW-300K1 Operating Instructions Manual page 105

OTHERS
Menu items Subitems and setting values Contents
Unlock All Clips
Execute/Cancel
Index Picture Pos
0sec to 10sec (0sec)
Find Mode
Clip / Rec Start
2)
Copy All Clips
Setting for
General Files
collective copy of
clips and/or
Clips&General
General files
Format Media Media(A)
Execute / Cancel
Formatting SxS
memory cards
Media(B)
Execute / Cancel
Plan.Metadata Load/Slot(A) or Load/Slot(B)
Execute / Cancel
Setting planning
metadata
Load/USB
(in UDF mode only)
Execute/Cancel
Select "Execute" to remove protection from all clips. (UDF
only)
Set the image for viewing thumbnails. This selects the time
difference from the start of the clip.
Set the action for when you press the PREV button/NEXT
button. (UDF only)
Clip: Move to the start of the current clip/next clip. (Pressing
the PREV button from the start of a clip will move to the
start of the previous clip.)
Rec Start: Move to the previous Rec Start Essence Mark/the
next Rec Start Essence Mark.
To copy all clips on an SxS memory card to the other.
To copy all files in the General folder on an SxS memory card
to the other.
To copy all clips and files in the General folder on an SxS
memory card to the other.
Select "Execute" to format the SxS memory card in slot A
with the selected file system (UDF/FAT).
Select "Execute" to format the SxS memory card in slot B
with the selected file system (UDF/FAT).
To load planning metadata from the SxS memory card in slot
A or B.
Selecting "Execute" displays the list of the planning metadata
files stored on the SxS memory card in slot A or B. Specify a
file, select "Load" then "Execute" for loading.
Notes
• The file list displays up to 64 files. Even if the total number
of planning metadata files is 64 or less, all of the planning
metadata files may not appear if the directory where they
are located in the SxS memory card (General/Sony/
Planning) contains 512 or more files.
• After you start loading, do not remove the SxS memory
card until the completion message is displayed.
Loads planning metadata from the USB flash drive connected
to the USB connector (type A).
Select "Execute" to show the list of the planning metadata
files stored in the USB flash drive and select a file to be
loaded.
Setup Menu List 105