On-Screen Indications - Sony PMW-300K1 Operating Instructions Manual

On-Screen Indications

While recording (or standing by to record), setting the DISPLAY switch of the viewfinder to ON displays
the statuses and settings of this unit on the viewfinder screen.
Remarks
[M]: The indication of the items named with this suffix can be independently turned on/off with "Display
On/Off" in the VF SET menu (page 94).
[A]: The indication of items named with this suffix can be turned on/off using the assignable buttons to
which the corresponding on/off functions have been assigned (page 49).
[D]: The settings of the items named with this suffix can be changed using the Direct menu on the screen
(page 17).
1.
Battery remaining/DC IN voltage
indication [M] (page 18)
2.
i.LINK status indication (page 112)
Only when an external device is connected to
the i.LINK connector, the status of the device is
displayed.
3.
Special recording/operation status
indication
zREC
STBY
CONT
zS&Q REC
16 On-Screen Indications
++ F1.62
Recording in progress
Standby for recording
Standby for recording
When using Clip Continuous
Recording, indicates that a
clip is being continued.
"CONT" flashing: When
using Clip Continuous
Recording, indicates that there
is no continuing clip.
Slow & Quick Motion
recording in progress
29/30fps
.
E
xt
S&Q STBY Standby for Slow & Quick
Motion recording
zINT REC Interval Recording in progress
INT STBY
Standby for Interval
Recording
zFRM REC
Frame Recording in progress
FRM STBY Standby for Frame Recording
zCACHE z in green: Standby for
Cache Recording
z in red: Cache Recording in
progress
4.
Media status indication
Memory card in slot A is active.
Memory card in slot B is active.
5.
Time data indication [M] (page 46)
6.
Media remaining indication [M] (page 31)
7.
Zoom position indication [M] (page 44)