Sony PMW-300K1 Operating Instructions Manual page 37

The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• Depending on the device, the Wi-Fi remote
commander may not appear properly on the device's
screen even though you input http://<camcorder's IP
address>(page 106)/rm.html in the address bar. In this
case, input "rms.html" for a smartphone or "rmt.html"
for a tablet at the end of the address to display the Wi-
Fi remote commander properly.
• The Wi-Fi remote commander on the device's screen
may no longer match the actual status of the camcorder
in the following cases. When this happens, refresh the
browser on the device.
—when the camcorder is restarted while the Wi-Fi
connection is established
—when the camcorder is controlled directly while
the Wi-Fi connection is established
—when the device is reconnected
—when you operate forward/backward on the
device's browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.
• Your smartphone/tablet may not be compatible with
the ad hoc mode. For details, refer to the operating
instructions supplied with the smartphone/tablet.
Compatible devices
The following devices, using the specified
versions or higher, can be used as Wi-Fi remote
commanders.
Device OS
PC Windows 7
Mac OS 10.7.4
Smartphone Android 2.3.3
iOS 5.1.1
Tablet Android 4.0.3
iOS 5.1.1
Browser
Internet Explorer 8
or Internet
Explorer 9
Safari 5.1.6
Standard browser
Safari
Standard browser
Safari
Using Wi-Fi Connection 37