Sony PMW-300K1 Operating Instructions Manual page 107

OTHERS
Menu items Subitems and setting values Contents
MAC Address
Net Config Reset
Execute / Cancel
Wi-Fi Scan Networks
Execute / Cancel
Setting for Wi-Fi
connection
Note
The IFU-WLM3
USB Wireless
LAN Module is
SSID (Network connection name
required.
display)
This item is not
Reset
available when
Network Type
using the CBK-
Infra / Adhoc
WA100 Wireless
Adapter.
Ch
1 to 11
Authentication
When "Network Type" is "Infra"
Open / Shared / WPA / WPA2
When "Network Type" is "Adhoc"
Open / Shared
Encryption
When "Authentication" is "Open"
or "Shared"
Disable / WEP
When "Authentication" is "WPA"
or "WPA2"
Disable / TKIP / AES
WEP Key Index
1 / 2 / 3 / 4
Input Select
When "Encryption" is "WEP"
ASCII5 / ASCII13 / HEX10 /
HEX26
When "Encryption" is "TKIP" or
"AES"
ASCII8-63 / HEX64
Key (network key)
Set
Execute / Cancel
Wi-Fi Status
x x x Connecting (display
only)
Display the MAC address.
Reset the "Network" settings to the preset values.
Select "Execute" to reset.
Scan the available network connections when "Wi-Fi" is set
to "Enable."
Note
When using the IFU-WLM3 USB Wireless LAN Module,
"Network Type" is not detected automatically. In this case, set
either "Infra" or "Adhoc" for "Network Type."
Reset the network connection name to the default settings.
Select the connection mode.
Infra: Infrastructure mode
Adhoc: Ad hoc mode
Set the wireless channel when "Network Type" is "Adhoc."
Select the network authentication.
Open: Open system authentication
Shared: Shared key authentication
WPA: WPA (Wi-Fi Protected Access) authentication
WPA2: WPA2 (Wi-Fi Protected Access 2) authentication
Select the type of data encryption.
Disable: Do not apply data encryption.
WEP: Apply WEP (Wired Equivalent Privacy)
TKIP: Apply TKIP (Temporal Key Integrity Protocol)
AES: Apply AES (Advanced Encryption Standard)
Select the key index when "Encryption" is "WEP."
Select the input format depending on the network key (or
security key).
ASCII5: Five characters ASCII format
ASCII13: 13 characters ASCII format
HEX10: 10 hexadecimal digits
HEX26: 26 hexadecimal digits
ASCII8-63: 8 to 63 characters ASCII 8-bit format
HEX64: 64 hexadecimal digits (characters)
Set the network key (or security key).
Confirm the "Wi-Fi" settings when "Wi-Fi" is set to "Enable."
Select "Execute" to confirm.
Display "Connecting" while connection is being attempted.
Display black squares to show the connection status by the
number of squares during communication.
Note
When using the IFU-WLM3 USB Wireless LAN Module in
the "Adhoc" mode, "Wi-Fi Status" is not displayed.
Setup Menu List 107