Tc/Ub Set Menu - Sony PMW-300K1 Operating Instructions Manual

TC/UB SET Menu

TC/UB SET
Menu items Subitems and setting values Contents
Timecode Mode
Setting the
timecode
Run
Setting
Reset
TC Out
Users Bit
Mode
Setting the user
bits
Setting
96 Setup Menu List
Preset / Regen / Clock
Rec Run / Free Run
Execute / Cancel
Auto / Generator
Fix / Date
Set the timecode mode.
Preset: To start the timecode from the specified value
Regen (regeneration): To continue the timecode during
recording only. When you insert another SxS memory
card, the camcorder starts next recording so that the
timecode continues from the last recorded timecode on the
card.
Clock: To use the current clock time as the timecode
Notes
• In Interval Recording, Frame Recording and Slow & Quick
Motion Recording, if you set "Mode" to "Preset" the
timecode advances in Rec Run mode regardless of the
"Run" setting. If you set it to "Clock," the timecode
advances in Regen mode.
• When the Picture Cache function (page 51) is active
("Setting" of "P.Cache Rec" is set to "On"), the timecode
always advances in Free Run mode. When the Picture
Cache Recording function is deactivated, the running mode
is restored to the selected mode.
Set the running mode when the timecode mode is set to
"Preset."
Rec Run: To advance the timecode during recording only. The
continuity of the timecode is maintained between clips in
the sequence of recording as long as the SxS memory card
is not changed. If you remove the memory card and record
on another card, the timecode will not continue when you
return the first card to the slot again.
Free Run: The timecode keeps advancing regardless of the
state of recording to the SxS memory card.
Set the timecode to a desired value.
Select "Execute" to reset the timecode to 00:00:00:00.
Select the timecode output.
Auto: To output the timecode generator value during
recording, and the timecode reader value during playback.
Generator: To output the timecode generator value during
recording or playback.
Set the user bit mode.
Fix: To use a desired fixed value as the user bits
Date: To use the current date
Set the user bits to a desired value.