Sony PMW-300K1 Operating Instructions Manual page 82

CAMERA SET
Menu items Subitems and setting values Contents
MF Assist
Turning the MF
Assist Function
on/off
Color Bars
Camera/Bars
Setting the Color
Bars
Bars Type
Flicker Reduce Mode
Setting Flicker
Compensation
Frequency
Handle Zoom
Setting the zoom
operation
Zoom Speed High
Setting the zoom
speed
Low
Remote
82 Setup Menu List
On / Off
Camera / Bars
Multi / 75% / 100% / SMPTE
Auto / On / Off
50 Hz / 60 Hz
60 Hz: UC model
50 Hz: Other models
Off / Low / High / Vari
1 to 99 (70)
1 to 99 (30)
1 to 99 (50)
Set to "On" to precisely adjust the focus automatically after
you roughly adjust it manually.
Select "Bars" to output color bars.
Select the type of color bar to be output when "Bars" is
selected.
Multi: Multiformat color bars are output.
75%: To output 75% color bars
100%: To output 100% color bars
SMPTE: To output SMPTE color bars.
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is detected.
Off: To not activate it
Notes
• It is recommended to set this to "Off" when shooting
outdoors or under lighting that does not cause flicker. (It
can be also "Auto," but the compensation may not be done
properly.)
• It is recommended to set this to "Auto" when shooting
indoors or under various lighting that may cause flicker,
such as fluorescent, sodium, or mercury-vapor lamps. (If
continuously shooting under lighting that may cause flicker,
"Mode" should be set to "On.")
Set to the power supply frequency of the light source causing
flicker.
Set the zoom operation by using the on-handle ZOOM button.
Off: Zoom does not work.
Low: Zoom works at the speed that is set for "Low" in "Zoom
Speed."
High: Zoom works at the speed that is set for "High" in
"Zoom Speed."
Vari: The deeper the on-handle ZOOM button is pressed, the
faster the zoom speed.
Set the zoom speed for the "High" setting of "Handle Zoom."
Set the zoom speed for the "Low" setting of "Handle Zoom."
Note
Zooming may not operate smoothly if you select a low speed.
Set the speed of zooming to be executed when you press the
ZOOM T/W button of the IR Remote Commander.
Note
If the infrared line from the Remote Commander is not
received properly, zooming may not operate smoothly.