Sony PMW-300K1 Operating Instructions Manual page 86

CAMERA SET
Menu items Subitems and setting values Contents
TLCS
Level
Setting the Total
Level Control
System (auto
adjustment system
of gain, exposure
and shutter)
Mode
Speed
AGC
AGC Limit
AGC Point
Auto Shutter
A.SHT Limit
A.SHT Point
Shockless
White
Setting the
shockless white
balance
White Switch
<B>
Setting for the
WHITE BAL
switch
ATW Speed
Setting for Auto
Tracing White
Balance
ATW Mode
ATW mode setting
Wide
Conversion
Setting for use of a
wide-conversion
lens
86 Setup Menu List
+1.0 / +0.5 / ±0 / –0.5 / –1.0
Backlight / Standard /
Spotlight
–99 to +99 (+50)
On / Off
3 / 6 / 9 / 12 / 18 dB
F2.8 / F4 / F5.6
On / Off
1/100, 1/150, 1/200, 1/250
F5.6 / F8 / F11 / F16
Off / 1 / 2 / 3
ATW / MEM
1 / 2 / 3 / 4 / 5
Natural / Pure
On / Off
Set the target level (to make brighter or darker) of auto iris
control in TLCS. (This setting also affects the gain control in
AGC mode and shutter-speed control in Auto Shutter mode.)
+1.0: Approx. one stop further open
+0.5: Approx. half a stop further open
±0: Standard
–0.5: Approx. half a stop further closed
–1.0: Approx. one stop further closed
Set the auto iris control mode in TLCS.
Backlight: Backlight mode to reduce darkening of the center
subject against lights
Standard: Standard mode
Spotlight: Spotlight mode to reduce blown-out highlights on
the center subject in the spotlight
Set the tracing speed of TLCS control.
Turn the AGC (Auto Gain Control) function on/off.
Set the maximum gain in AGC.
Set the iris point for switching to auto-iris and AGC (Auto
Gain Control) control when AGC is on.
Turn the Auto Shutter control function on/off.
Set the maximum shutter speed in Auto Shutter control.
Set the exposure position for switching auto iris and auto
shutter control when Auto Shutter is on.
Select the speed of change in white balance when the white
balance mode is switched. Set to "Off" to instantly change the
white balance.
Select a larger number to change the white balance more
slowly through interpolation.
Select the white balance adjustment mode selected at the B
position of the WHITE BAL switch.
Set the tracing speed of ATW. The larger the number you set,
the speed becomes faster.
Natural: Depending on the brightness of scenes, automatically
adjusts the white balance to natural ambience.
Pure: Not leaving the blue color or red color, automatically
adjusts the white balance closer to original colors.
Set to "On" when a wide-conversion lens is attached.