Preparing Specialty Coffees; Preparing Two Specialty Coffees - Jura GIGA X8 Instructions For Use Manual

Table of Contents

Advertisement

Preparing specialty
coffees
Preparing two specialty
coffees
E The product selector view disappears automatically after
10 seconds if no preparation is started.
E The last product selected always appears first in the product
selector view.
E You can move any of the standard products programed in
your GIGA to your preferred position on the start screen and
make it one of your favorites. You can duplicate and
personalize your favorite specialty coffees by giving them a
new product name and individual settings (e.g. amount and
coffee strength) (see Chapter 4 'Permanent settings in
programming mode – Product settings'). Please note that the
descriptions provided in the following sections always refer to
the default settings.
Example: Proceed as follows to prepare one coffee.
Precondition: The start screen is displayed.
T  Place a cup under the dual spout.
T  Touch 'Coffee'.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. Your GIGA is once more
ready for use.
Example:  Proceed as follows to prepare two Americano (using
product selector view).
Precondition: The start screen is displayed.
T  Place two cups under the dual spout.
T  Turn the Rotary Switch to view the product selector.
T  Move your finger across the display until
displayed in the center.
T  Touch
'2 x Americano'
Preparation starts. The preset amount of water for coffee
flows into the cups. Preparation stops automatically. Your
GIGA is once more ready for use.
'2 x Americano'
to start preparation.
2 Preparation
is
17

Advertisement

Table of Contents
loading

Table of Contents