Miele DGC 6700 Operating And Installation Instructions page 12

IMPORTANT SAFETY INSTRUCTIONS
~
Always place oven racks and pans
in desired location while the oven is
cool. If they must be removed while the
oven is hot, do not let the potholders
contact hot heating elements in the
oven.
~
When handling cooking pans take
care not to let the contents spill, and
that you do not come into contact with
either hot steam or the hot oven walls.
Danger of scalding and burns.
~
Pans must be heat resistant up to
212°F (100°C). Otherwise they may
melt at high temperatures in the oven.
~
Do not leave cooked foods in the
cooking compartment. Do not use items
in the steam oven which may rust. This
could lead to the corrosion of the
appliance.
~
Do not use silicone baking pans in
the Combi Steam/Convection Bake,
they are not steam-resistant.
~
Do not place pots, pans, baking
sheets or cooking pans directly on the
oven floor.
~
Never line the oven floor with
aluminum foil and do not use protective
foil coverings available in retail stores to
protect the oven from soiling. They
affect the cooking and baking
performance significantly and block the
steam inlet.
12
~
The door can support a maximum of
22 lb (10 kg).
Do not stand or sit on the open door,
and do not place heavy items on it.
Make sure that nothing gets caught
between the oven door and the oven
interior. This could damage the Combi
Steam Oven.
~
Coarse food particles can clog the
drain and the pump. Make sure that the
drain filter is always in place.
~
Do not keep the roast probe in the
oven interior, it could become
damaged the next time the oven heats
up.
~
Make certain that the power cords of
small appliances do not come in
contact with or get caught in the oven
door.
~
Do not operate the appliance
without the lamp cover in place, steam
can come into contact with live parts
and cause a short circuit. Electric
components could be destroyed.
~
If the appliance is installed behind a
cabinet door, it must be operated with
the cabinet door open.
Close the cabinet door only when the
unit is completely dry.