2
Gas supply and manual shut-off valve
All gas piping must comply with AS/NZS 5601. Piping must be correctly sized to
suit product supply requirements and ensure a minimum supply pressure of
1.13kpa (natural gas). The maximum gas consumption for this product can be
found on the product label affixed to the unit. An AGA approved manual shut-off
valve must be installed in the gas supply line for this unit. The valve should be
installed in a suitable location adjacent to the unit which will ensure easy access
for service.
3
Once an A.G.A approved manual shut-off valve is fitted it may be positioned
horizontally or vertically subject to location of heater and ease of access.
Product Dimensions
External products
Internal products
7
Part 5442225 issue E