Table of Contents
Advertisement
8
Installation of Navigator Controller (cont)
INSTALLATION OF TRANSCEIVER
The transceiver cable connects to the control box as
shown.
Fully extend the transceiver cable (4 meters) and attach
the transceiver housing to a solid surface such as a rafter
or vertical column using the two screws provided. Avoid
direct
contact
transceiver plug to one of the two thermostat connections
on the control box.
When the installation is complete and the power to the
heater is turned on, a green LED in the transceiver case
should be visible confirming it is connected correctly and
is ready for pairing with a Navigator controller.
To ensure trouble free operation, the transceiver
housing & connecting cable should not be installed
within 200mm of any power cables or other radio
transmitting devices. The transceiver housing should
be placed 1m away from any metal object.
Do not screw the transceiver to the back of the
control box; it must be run into roof space.
PAIRING THE NAVIGATOR CONTROLLER (Remote Only)
The BONAIRE Navigator Controller and transceiver does
not have any pairing information when they are delivered
from the factory.
On the first power up, the transceiver will request to PAir
with Navigator Controller for period of a 30 min window
and its green light will be illuminated. If it does not PAir
within that time, it will PAir on the next power up. Put the
Navigator Control in pairing mode -
1. Press & hold the ENTER button for 3 seconds.
2. Press the Heat/Cool, Mode & Setup buttons in
sequence. The display will flash "PAir".
3. After a few seconds the Navigator Controller displays
the "ro XX" ("XX" is the unique serial number. For
example "ro 22"). It will also display the strength of the
signal.
4. Press the ENTER button to pair the transceiver and the
Navigator Controller.
NOTE: Wait until the backlight turns off and press
any key after 2 minutes.
5. Press the ON/OFF button to go to the main display.
with
metal
surfaces.
RF Transceiver & cable
Connect
the
1DYLJDWRU &RQWUROOHU 7UDQVFHLYHU
&RQQHFWLRQV
11
assembly
Part 5442225 issue E
Hide quick links:
Advertisement
Table of Contents
