Rec Mode Menu; Slot Mode Menu; Clip Set Menu - JVC GY-HM150U Instructions Manual

Menu Display and Detailed Settings
Record Set Menu
(continued)

Rec Mode Menu

* Default values are indicated in bold characters.
Item
Rec Mode
Rec Frames
Rec Interval

Slot Mode Menu

Item
Slot Mode
Backup Rec

Clip Set Menu

Item
Clip Name Prefix xxxG
(The default value of xxx
is the last three digits of
the serial number.)
Reset Clip
Number
Setting Values
Normal
Pre Rec
Clip Continuous
Frame Rec
Interval Rec
1frame
3frames
6frames
1sec,
2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min,
30min, 1hour
Setting Values
Series
Dual
Backup
^
Setting Values
For setting the first four characters of the name of the clip file to be recorded to the SDHC/
SDXC card.
Enter any of the 38 characters including alphabets (upper case), numbers (0 to 9), "_"
(underscore), and "-" (hyphen) using the software keyboard.
( A Page 59 [Text Input with Software Keyboard])
^
For assigning a new number to (Clip Number) by resetting it (0001). Select [Reset] and
press the center of the set lever to reset the number.
When other clips exist on the SDHC/SDXC card, the smallest available number is used
after reset.
Example: If the [Clip Name Prefix] is ABCD , and ABCD0001 already exists on the
For selecting the record mode for recording to the SDHC/SDXC card.
(A Page 45)
Memo :
● When [Slot Mode] is set to Backup , this item is fixed at Normal and
cannot be selected.
For setting the number of frames to record when [Rec Mode] is set to Frame
Rec or Interval Rec .
For setting the recording time interval when [Rec Mode] is set to Interval
Rec .
For setting the operation of the card slot. (A Page 42)
Series : Mode that activates the two slots sequentially.
Dual : Mode that activates the two slots at the same time.
Backup : Mode that enables recording to slot B without using the [REC] button.
This item is selectable only when [Rec Mode] is set to Normal .
Start or stop recording using the [Backup Rec] menu or user button
that is assigned the function. (A Page 66)
Memo :
● When this is set to Series , and recordable media are loaded to both the
slots, pressing the [REC] button starts recording only to the card in the
selected slot (active slot).
● When this is set to Dual , and recordable media are loaded to both the
slots, pressing the [REC] button starts simultaneous recording to the cards
in both slots.
For starting/stopping backup recording with [REC]/[STBY].
This item is selectable only when [Slot Mode] is set to Backup .
Note :
● When recording is stopped due to no remaining space on the media, etc.,
this item is fixed at STOP and cannot be selected.
SDHC/SDXC card, ABCD0002 will be assigned.
Function
Function
Function