Viewing The Viewfinder/Lcd Screen - JVC GY-HM100U Instructions Manual

Preparations
Settings and Adjustments
Before Use (continued)

Viewing the Viewfinder/LCD Screen

You can monitor video images on this camcorder using the
viewfinder, LCD screen, or both.
Viewing with the viewfinder
1 .
Pull out the viewfinder.
2 .
Incline the viewfinder vertically to a position that
enables easy viewing.
3 .
Turn the eyepiece focus lever to adjust the focus.
Viewing with the LCD screen
1 .
Open the LCD cover.
2 .
Incline the LCD cover to a position that enables
easy viewing.
Face-to-face Shooting
Direction
(direction in which the
screen faces the subject)
ON
Relationship between the viewfinder and LCD screen
displays
VF Status LCD Status
OFF OFF
ON OFF
OFF ON
ON ON
ON ON (Face-to-face
shooting direction)
T1 In accordance with [PRIORITY SETTING] in the [CAMERA
SETTINGS] menu. (A Page 66)
T2 When [PRIORITY SETTING] is set to [ALWAYS-ON
VIEWFINDER]
Memo :
● When the HDMI, COMPONENT OUT or A/V OUT terminal
is connected, video images will not appear on the
viewfinder.
22
ON
Eyepiece
Focus Lever
Video Output
VF
VF
LCD, VF (T2)
In accordance with the
menu settings (T1)
VF and LCD
Adjusting the brightness of the viewfinder/LCD
screen
When a screen is displayed on the viewfinder, performing
the following steps adjusts the brightness of the viewfinder.
When a screen is displayed on the LCD, the brightness of
the LCD is adjusted.
When a screen is displayed on both the viewfinder and
LCD, only the brightness of the viewfinder is adjusted.
Select [MONITOR BRIGHT] in the [DISPLAY SETTINGS]
menu. (A Page 65)
A slide bar for adjusting the screen brightness appears.
1 .
Push the Set Lever to the left or right.
● Doing so moves the slide bar and changes the
brightness of the screen.
2 .
Press the center of the Set Lever.
Setting the brightness of the LCD screen backlight
Select [MONITOR BACKLIGHT] in the [DISPLAY
SETTINGS] menu. (A Page 65)
0