Off Display - JVC GY-HM100U Instructions Manual

Menu Screens
Menu Screens of the Video
Shooting Mode (continued)
Item
Items that are shaded (
R
Settings with the mark are default values.
AUDIO REF. LEVEL
MIC LEVEL SETTING
INTERNAL MIC LEVEL
AUDIO MONITOR
TC PRESET
DROP FRAME
TC GENE.
UB PRESET
TC DISPLAY
64
Description
) are common to all modes.
For setting the reference audio recording level.
R
-20dB
-12dB
For setting the input level of the microphone connected to the MIC terminal.
R
-2,-1, 0,+1,+2
For setting the input level of the built-in microphone.
R
-2,-1, 0,+1,+2
For setting the audio sound of the headphone.
R
MIX : Outputs mixed sound.
STEREO : Outputs stereo sound.
For setting the time code or user's bit.
A separate screen is displayed. (A Page 42)
Use this item to preset the time code.
For setting the time code generator framing mode to drop-frame or non-drop-frame.
R
DROP : Internal time code generator works in drop-frame mode. Use this setting when
you want to place emphasis on the recording time.
NON DROP : Internal time code generator works in non-drop-frame mode. Use this setting
when you want to place emphasis on the number of frames.
Memo :
● This item can be specified only when [SYSTEM SELECT] is set to [1080-60/30] or [720-60/30]. It
is fixed at [NON DROP] when set to [720-24].
For setting the time code generator to the preset mode or regeneration mode.
The run mode during the preset mode can also be selected.
FREE : Enables the preset mode in the free-run mode. The time code operates in the run
mode at all times when preset to this position.
R
REC : Enables the preset mode in the rec-run mode. The time code operates in the run
mode only during recording.
REGEN : Enables the regeneration mode. The time code on the SD card is read, and time
code is recorded in continuation of this value.
A separate screen is displayed. (A Page 42)
Use this item to preset the user's bit.
For selecting whether to display the time code or user's bit on the screen.
OFF : Both the time code and user's bit are not displayed.
R
TC : Displays the time code.
UB : Displays the user's bit.