Preparations; Settings And Adjustments Before Use; Adjusting The Grip Belt; Setting Up The Remote Control - JVC GY-HM100U Instructions Manual

Preparations

Settings and Adjustments
Before Use

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt accordingly.
Caution :
● If the grip is loose, the camcorder may fall off resulting in
injuries or malfunction.
● Parents should take extra care when your child is using the
camcorder.

Setting up the Remote Control

The remote control comes supplied with batteries when you
purchase this product.
To start using, pull out the insulation sheet.
Insulation Sheet
Memo :
● To use the remote control, set [REMOTE] in the [CAMERA
SETTINGS] menu to [ON].
● Point the front end of the remote control toward the sensor.
Use the remote control within a distance of 5 meters from
the camcorder. The camcorder may not respond to the
remote control operations at some angles.
Replacing batteries
1 .
Press the lock tab, and pull out the battery holder.
2 .
Replace the button battery (CR2025).
Lock Tab
Button Battery
18
AWB
Remote Control Sensor

Attaching an External Microphone

You can attach a microphone to the microphone holder.
The supplied microphone is a phantom microphone.
1 .
Turn the knob on the microphone holder
anticlockwise to loosen it and open the microphone
holder.
2 .
Place the microphone in the microphone holder.
3 .
Turn the knob on the microphone holder clockwise
to secure the microphone.
4 .
Connect the microphone to the INPUT1/INPUT2
audio input terminal, or the MIC terminal according to
the type of microphone cable terminal you are using.
INPUT1/INPUT2 Terminal: XLR Terminal
MIC Terminal
5 .
Attach the microphone cable to the clamp.
6 .
Specify the audio input settings correctly.
(A Page 40)
1.3. Knob
5. Clamp
Memo :
● When the audio unit cable is connected to the AUDIO IN
terminal of the camcorder, the MIC terminal is disabled.

Attaching the Tripod

To prevent the camcorder from falling off, which may result in
injuries or damages, read the instruction manual of the tripod
to be used and make sure that it is securely attached.
(A Page 12)
Caution :
● Use the tripod on a stable surface.
: Mini-jack Terminal (stereo)
2. Microphone
Microphone Holder
4. INPUT1/
INPUT2 Terminals
AUDIO IN
Terminal
4. MIC Terminal