JVC GY-HM100U Instructions Manual page 63

Item
Items that are shaded (
R
Settings with the mark are default values.
DISPLAY ON TV
VIDEO OUTPUT
COMPONENT
OUTPUT
HDMI OUTPUT
HDMI COLOR
SETTING
HDMI ENHANCE
SETTING
FORMAT
VIDEO NO. RESET
IMAGE NO. RESET
INPUT1
INPUT2
MIC
Description
) are common to all modes.
For setting connections with external devices.
For specifying whether to enable on-screen display on the monitor.
R
OFF : Disables on-screen display.
ON : Enables on-screen display.
For selecting the monitor type.
4:3 : When connecting to a conventional monitor (4:3)
R
16:9 : When connecting to a wide monitor (16:9)
For selecting the resolution of video output from the component terminal to match the connected
monitor.
R
480i : When connecting to a monitor that supports 480i and 480p
720p : When connecting to a monitor that supports 720p
1080i : When connecting to a monitor that supports 1080i
This setting is fixed at 576i when 1080-50/25 or 720-50/25 is selected for
For selecting the resolution of video output from the HDMI terminal to match the connected
monitor.
Set this item when images are not properly displayed on a monitor that supports a maximum
output of 1080i.
R
AUTO : Use this setting under normal circumstances. Resolution is automatically set
according to the connected monitor.
480p : Outputs at 480p.
480i : Outputs at 480i.
This setting is fixed at 576p or 576i when 1080-50/25 or 720-50/25 is selected for SYSTEM
SELECT.
For selecting the color format of HDMI signals.
R
AUTO : Outputs upon detecting YUV/RGB automatically according to the connected
monitor.
RGB : Outputs RGB signals.
For setting the color range of HDMI signals.
R
OFF : When connected to a conventional monitor
ON : When connected to a PC monitor
For setting processes related to the SD card.
A separate screen is displayed. (A Page 24)
Erases all data.
A separate screen is displayed. (A Page 24)
Resets the video file number.
A separate screen is displayed. (A Page 24)
Resets the still picture file number.
For selecting whether to reduce wind noise from the microphone.
For selecting whether to reduce wind noise from the microphone connected to the INPUT1
terminal.
R
OFF : Wind noise is not reduced.
ON : Reduces wind noise.
For selecting whether to reduce wind noise from the microphone connected to the INPUT2
terminal.
R
OFF : Wind noise is not reduced.
ON : Reduces wind noise.
For selecting whether to reduce wind noise from the microphone connected to the MIC terminal
and the built-in microphone.
R
OFF : Wind noise is not reduced.
ON : Reduces wind noise.
.
SYSTEM SELECT
63