Monitoring Audio Sound Using A Headphone; Time Code Recording Setting; Displaying The Time Code/User's Bit; Recording The Time Code - JVC GY-HM100U Instructions Manual

Monitoring Audio Sound
Using a Headphone
Applicable to: Video shooting mode, video playback mode
Connecting the headphone
Connect the headphone to the headphone (
Setting the headphone sound to mixed sound or
stereo sound
Menu settings
Set the [AUDIO MONITOR] menu.
(A Page 64)
Adjusting the headphone's audio level
Turn the ADJ./VOL. knob.
ADJ./VOL.
Knob
Headphone Jack
ACCESS
IRIS
SHUTTER
OPEN
REC
AE ±
CLOSE
DC
Time Code Recording
Setting
Applicable to: Video shooting mode
) jack.

Displaying the Time Code/User's Bit

Menu settings
Set [TC DISPLAY] in the [TC/UB] menu to [TC] or [UB].
TC: Displays the time code.
UB: Displays the user's bit.

Recording the Time Code

The time code of the camcorder's built-in time code
generator as well as user's bit can be recorded. The time
code generator comes in the preset and regeneration
modes. When in the preset mode, you can set the time
code and user's bit freely. (A Page 42)
Recording time code and user's bit in the preset
mode
Menu settings
Set [TC GENE.] in the [TC/UB] menu to [FREE] or [REC].
FREE
REC
Recording time code in continuation of the
recorded time code on the SD card
Menu settings
Set [TC GENE.] in the [TC/UB] menu to [REGEN].
Memo :
● When recording is stopped and the SD card is removed,
the time code will be displayed as follows.
[REC], [REGEN] : Time code generated when the
[FREE]
Time Code
: The time code operates in the run mode at all
times.
: The time code operates in the run mode only
during recording.
recording was last stopped.
: Operates in the run mode at all times.
41