Inserting An Sd Card - JVC GY-HM100U Instructions Manual

Inserting an SD Card

This camcorder comes with two SD card slots.
(Slot A and Slot B)
SD cards to use
● See ASD CardsB on Page 7.
● SDXC cards are not supported.
A/B
Notched Corner
Preparation: Turn off the power.
1 .
Open the door.
2 .
Insert an SD card with the notched corner first.
3 .
Close the door.
Selecting a card slot
Press the A/B button.
● Doing so switches between Slot A and Slot B.
● When an SD card is inserted, the access lamp of the
selected slot lights up.
● When data in the SD card is being accessed, the
access lamp blinks.
Switching between Slot A and Slot B
automatically
Set [SLOT AUTO SWITCHING] in the [CAMERA SETTINGS]
menu to [ON]. (A Page 65)
● When the space on an SD card runs out during
recording in the shooting mode, data is automatically
recorded to the other SD card.
● When playback from an SD card ends in the playback
mode, playback from the other SD card starts
automatically.
● When the Automatic Slot Switch feature is turned [ON],
an automatic slot switch icon appears on the screen.
Memo :
● If the SD card to switch to cannot be read, slot switching
will not be performed.
● When an SD card is inserted into the slot to switch to
during recording, slot switching will not be performed as
the SD card cannot be read. Stop the recording first and
allow the SD card to be read.
Door
1 .
2 .
3 .
4 .
● Do not touch the metal part of the SD card when inserting
Automatic Slot Switch
Removing the SD card
Open the door.
Make sure the SD card to be removed is not being
accessed (access lamp blinking).
Push the SD card and remove it from the slot.
Close the door.
Caution :
or removing the SD card.
Display of selected slot
with an SD card icon
during shooting mode
[ 5 h 3 6 m ]
A
[ ]
5 h 3 6 m
B
Video mode:
Remaining time
Still picture mode:
Remaining number of shots
23