Removing The Hood; Charging The Battery - JVC GY-HM100U Instructions Manual

Removing the Hood

Remove the hood when attaching a filter (with external
diameter 50 mm and below), teleconverter or wide converter
to the front of the lens.
Turn the hood in an anti-clockwise direction to
remove it.
Hood

Charging the Battery

There are two ways to charge the battery.
Charging with the supplied battery charger.
Charging with this camcorder.
Charging the Battery with the Supplied
Charger
1 .
Connect the battery charger to a power outlet using
the provided power cord.
2 .
Attach the supplied battery to the battery charger
by pressing and sliding it in the direction of the
arrow.
● When battery charging starts, the indicating lamp
blinks.
● When charging is complete, the indicating lamp lights
up.
3 .
Remove the battery by sliding it in the opposite
direction after charging is complete.
To Power Outlet
Power Cord
Battery
Charger
Battery
Indicating Lamp
Charging the Battery with this Camcorder
1.
Turn off the power of the camcorder.
2 .
Attach the supplied battery.
With the battery mark (D) on the left, insert it into the
camcorder, and slide it to the left.
3 .
Connect the AC adapter that is provided with the
camcorder.
Connect the DC cable to the DC terminal, and the AC
adapter to a power outlet using the provided power cord.
● When battery charging starts, the access indicating
lamp blinks.
● When charging is complete, the access indicating lamp
goes out.
Access Indicating Lamp
Battery Lock
Release Button
Battery
AC Adapter
Charging time and continuous recording time (approximate)
Charging Time
Battery
BN-VF815U Approx. 2 hrs 40
mins
BN-VF823U Approx. 3 hrs 40
mins
(Provided)
● The above are the approximate charging times when
used under an ambient temperature range of 10°C to
35°C.
● A longer charging time may be required if the battery has
been left unused for a long time.
● Recording time may differ depending on the age of the
battery, charging condition, and operating environment.
● Recording time is shortened in cold environments.
● Recording time is shortened when the zoom lens and
LCD screen are frequently used.
Removing the battery
1 .
Turn off the power of the camcorder.
2 .
Press the battery lock release button and slide the
battery to the right.
DC Terminal
Power Cord
To Power Outlet
Continuous
Recording Time
Approx. 1 hr 25
mins
Approx. 2 hrs 10
mins
19