Table of Contents
Advertisement
Getting Started
Viewing the Viewfinder/LCD Monitor
You can monitor video images on this camera recorder using the viewfinder
or LCD monitor.
Viewing with the viewfinder
o
1
Adjust the viewfinder to an easy-to-see position.
2
Turn the eyepiece focus lever to adjust the focus.
Eyepiece Focus
Lever
.
Viewing on LCD monitor
o
1
Open the LCD monitor.
2
Adjust the LCD monitor to an easy-to-see position.
.
Memo :
While the LCD monitor is opened, there will be no image display on the
0
viewfinder.
Adjusting the brightness of LCD monitor
o
Set the brightness using "MONITOR BRIGHTNESS" in the "SETUP" menu.
" MONITOR BRIGHTNESS " (A p. 114)
14
Adjusting the Grip Belt
.
A Open the pad.
B Adjust the length of the belt
C Close the pad.
Caution :
Be sure to fasten the grip belt properly.
0
If the belt is loose, this unit may drop and result in injuries or damages.
Removing the Hood
Remove the hood when attaching a filter, teleconverter or wide converter to
the front of the lens.
Press and hold the release button on the back of the hood, turn the hood
0
in the anti-clockwise direction to remove it.
.
To attach a hood, press it against the lens, and turn it in the clockwise
0
direction.
Opening the Lens Cover
Use the lens cover switch to open or close the lens cover.
Before shooting, open the lens cover.
Lens Cover Switch
.
Memo :
When this camera recorder is not in use, close the lens cover to protect
0
the lens.
Do not press against the lens cover with force. Doing so may damage the
0
lens or the cover.
Hood Release
Button
Advertisement
Table of Contents
