Appendix; Glossar - Danfoss VLT 5000 Operating Instructions Manual

Glossar

Changes during operation
"Yes" means that the parameter can be changed,
while the frequency converter is in operation. "No"
means that the frequency converter must be stopped
before a change can be made.
4-Setup
"Yes" means that the parameter can be programmed
individually in each of the four setups, i.e. the same
parameter can have four different data values.
"No" means that the data value will be the
same in all four setups.
Conversion index
This number refers to a conversion figure to
be used when writing or reading by means
of a frequency converter.
Conversion index
74
2
1
0
-1
-2
-3
-4
Data type
The data type shows the type and length of the telegram.
Data type
3
4
5
9
7
9
58
Conversion factor
0.1
100
10
1
0.1
0.01
0.001
0.0001
Description
Integer 16
Integer 32
Unsigned 8
Unsigned 16
Unsigned 32
Text string
VLT® 5000/ 5000 FLUX/ 6000 HVAC/
8000 AQUA PROFIBUS
MG.90.G1.02 - VLT is a registered Danfoss trademark