A/B In Module Cabling (Optional) - Motorola DCP501 Installation Manual

A/B IN Module Cabling (Optional)

The optional A/B IN module is a separate unit that mounts over the Cable In port on the rear
panel of the DCP501. It contains coaxial input connectors used in a dual cable system and with
an A/B box.
Figure 3-18 illustrates the DCP501 with the return on Cable A:
Figure 3-18
A/B In module with return on Cable A
Cable B
CABLE IN
RF (75 ohm)
coaxial connection
Cable A (return)
A
B
Installation
MODEL NO.: DCP 501
À LA PLUIE NI À L'HUM IDITE".
DCP501 Installation Manual
3-23