Motorola DCP501 Installation Manual page 21

2-6 Overview
Item Control
4 Display
SETUP
+
CHANNEL/
PRESET " " " "
+
"
TUNE
+
AUDIO MODE
MENU
+
GUIDE
+
INFO
5 AUDIO MODE
TONE/LEVEL
AM/FM
FM MODE
TUNE ! ! ! ! " " " "
6 SOURCE
7 VOLUME
8 POWER
9 PHONES
10 PLAY·PAUSE
STOP
! ! ! ! SKIP·SEARCH" " " " In playback: Press ! to select previous chapter (track) or press " to select next
11 Loader
DCP501 Installation Manual
Description
Refer to DCP501 Display in this section for information on the DCP501 display.
Cable TV source:
Hold: Cold initialize after 3 seconds
Cable TV source:
Hold: Unit reset after 3 seconds
Selects surround sound mode (toggle through all available modes).
Press once to enter Bass Level Change mode.
Press twice to enter Treble Level Change mode.
Press three times to enter Balance Level Change mode.
Press four times to enter Fader Level Change mode.
If Tuner not source: Selects Tuner.
Tuner source: Changes radio band (AM#FM, FM#AM).
Press once to force FM station to mono.
Press again to return to normal.
Press to increase ! or decrease " radio tuner frequency.
Hold to scan to next ! or previous " strongest signal (station).
Selects viewing source in the following sequence:
CATV#DVD/CD#TUNER#
VCR1#VCR2#VIDEO1#
VIDEO2#TAPE$
Increases (clockwise) or decreases (counter-clockwise) pre-amp and speaker
level.
Places DCP501 in standby mode.
Jack for headphones connection.
In Playback: Pauses playback of DVD/CD.
Not in Playback: Begins playback of DVD/CD.
Stops playback of DVD/CD.
Press once: place DVD/CD player in resume state.
Press twice: stop DVD/CD player.
chapter (track).
Hold ! to rewind and play DVD/CD x2.
Hold " to fast forward and play DVD/CD x2.
Loader for disc.