Motorola DCP501 Installation Manual page 173

D-28 Diagnostics
Table D-23
STARFONE poll commands, status, and errors
Poll command, status, or error
Last Poll Command
Last Poll Acknowledge
Last Prepare For Poll Command
Last Prepare For poll Acknowledge
Dial Attempts
AT Command Errors
Busy Errors
No Answer Errors
Line In Use Errors
Successful Calls
Read Data Errors
Carrier Lost
Timeout Errors
Missing Poll Ack Errors
DCP501 Installation Manual
Description
DCT Poll message (send poll buffer subcommand) sent from
the HMS to the DCT
DCT Poll Acknowledge (ack poll buffer subcommand) sent
from the HMS to the DCT
Prepare For Poll message sent from either the AC or the HMS
to the DCT
Prepare For Poll Acknowledge (ack purchase subcommand of
DCT Operations Msg) message from the AC to the DCT
Dial commands received unconditional or conditional
(when condition is TRUE) NOT including retires.
Cleared by Cold Init.
Communication error between DCCT and modem
including retries. Cleared by Cold Init.
Call gets busy signal including retries. Cleared by Cold
Init.
No answer to call including retries. Cleared by Cold Init.
External device on line or no dial tone including retries.
Cleared by Cold Init.
Call completed without error. Cleared by Cold Init.
Communication error reading data from the HMS or
DAC. Cleared by Cold Init.
Lost Connection or inactivity timeout. Cleared by Cold
Init.
Timeout (Inactivity Timeout in Phone Params Config
Msg) waiting for message from HMS or DAC. Cleared
by Colt Init.
DCT transmitted Poll but did not receive a Poll Ack from
HMS or DAC.