D 03: In-Band Receiver Status - Motorola DCP501 Installation Manual

D-10 Diagnostics

D 03: In-Band Receiver Status

The DCP501 displays the in-band diagnostics for the last attempted channel tune. If a digital
carrier is not present, the diagnostics indicate the carrier lock is analog. When the carrier lock is
analog, all fields for digital, other than a carrier lock channel, are blank.
Figure D-6 illustrates the in-band receiver status as shown on the LED:
Figure D-6
In-band receiver digital status − − − − LED
Figure D-7 illustrates the IN-BAND DIAGNOSTIC (in-band receiver digital status) OSD:
Figure D-7
IN-BAND DIAGNOSTIC (in-band receiver digital status) − − − − OSD
03
DATA
EMM DATA
CARRIER LOCK
PCR LOCK
SNR
AGC
MODULATION MODE
SHORT TERM ERROR
COUNT
LONG TERM ERROR
COUNT
TUNED FREQ
DCP501 Installation Manual
Data
activity
MUTE
PCR
lock
IB diagnostic
indicator
IN-BAND DIAGNOSTIC
36 dB
543.000
EMM
data
activity
P
MUTE
Carrier lock
Modulation
mode
*
*
YES
YES
GOOD
Ssss
(Analog,64QAM,256QAM)
0000
0000