Table D-20 Starvue Ii Ippv Status - Motorola DCP501 Installation Manual

D-24 Diagnostics
The Level field indicates the approximate power value of the STARVUE II transmitter in dBmV.
The difference between the power value on the diagnostic screen and the actual power of the
STARVUE II module is
The LAST POLL REQ field contains the sequence number of the last poll request received by the
DCP501. The time stamp of the last poll request will be displayed immediately below LAST
POLL REQ. If no poll request has been received by the DCP501, the sequence number field will
display N/A and the time stamp field will display N/A. If a poll request has been received by the
DCP501 but the system time of the DCP501 has not yet been initialized, the time stamp field will
display NOT AVAILABLE.
The LAST POLL ACK field contains the sequence number of the last poll acknowledge received
by the DCP501. The time stamp of the last poll acknowledge will be displayed immediately below
LAST POLL ACK. If no poll acknowledge has been received by the DCP501, the sequence number
field will display N/A and the time stamp field will display N/A. If a poll acknowledge has been
received by the DCP501 but the system time of the DCP501 has not yet been initialized, the time
stamp field will display NOT AVAILABLE.
Table D-19 lists the STARVUE II transmitter status:
Table D-19
STARVUE II transmitter status
LED and OSD Indicator
- Idle
T Transmitting
Table D-20 shows how the LED and OSD indicate the IPPV status:
Table D-20
STARVUE II IPPV status
LED OSD
On ENABLED
flashing
UNSENT
DISABLED
off
−
The variable ## is the number of unsent transactions.
DCP501 Installation Manual
±
5 dBmV.
Mode
IPPV enabled
− The DCP501 contains unsent IPPV
##
transactions
IPPV disabled