Data Activity And Emm Data Activity Indicators - Motorola DCP501 Installation Manual

D-8 Diagnostics
OOB DIAGNOSTIC (out-of-band status) − − − − OSD (Agile enabled DCP501)
Table D-4 lists the LED and OSD indications of whether the out-of-band receiver is locked to the
carrier (this indicator can falsely indicate locked):
Table D-4
LED and OSD indicators for out-of-band receiver state
LED OSD
YES
L
NO
U

Data Activity and EMM Data Activity Indicators

The LED EMM Data Activity indicator is lit when a message is present and the Data Activity
indicator shows receipt of a message. The OSD indicates with a * that data has been received.
The indicators cover all packet processors regardless of which stream they are monitoring and
are cleared when you enter the diagnostic.
Figure D-4 lists how the EMM data activity indicator shows when the DCP501 is receiving a
message on the EMM stream:
Table D-5
Out-of-band EMM data activity indicator − − − − LED and OSD
LED OSD
Blank
Off
*
On
DCP501 Installation Manual
02 OOB DIAGNOSTIC
DATA
EMM DATA
CARRIER LOCK
HUNT MODE
CUR FREQ
LKC
EMM PRVDR ID
MANUAL FREQ
# = number of times lost lock
State
Carrier locked
Carrier unlocked
Status
No data received
Data received
* SNR 23 dB GOOD
*
COUNT #
NONE, RR, SRCH,
FIX, or EMM
75.25MHz,
104.2MHz,
72.75MHz, 92.2
MHz, 98.2MHz,
107.2MHz,
107.4MHz,
110.2MHz,
116.2MHz, or
103.7MHz
Same as CUR FREQ
0x0000
Same as CUR FREQ