Specifications; Digital Cable Receiver; A/V Receiver And Amplifier - Motorola DCP501 Installation Manual

Appendix A

Specifications

Digital Cable Receiver

Clear analog video
64 and 256-QAM demodulator
Agile OOB tuner
Return Path
Standard definition MPEG2
NTSC video decoder with adaptive digital comb
filter
Graphics

A/V Receiver and Amplifier

RMS Output Power
2x100 Watts
5x100 Watts
Dolby    Digital Decoder
DTS    Decoder
Dolby    Prologic II Processing
Audio effects processor
Amplified speaker outputs
Headphone output
Analog volume control, all speakers
Balance control, right/left
Balance control, front/rear
Tone control, front left/right
SPDIF input with Auto Detect
BTSC decoder
AM/FM Tuning
Component Video Output for All Input Sources
Audio Frequency Response
Harmonic Distortion
< 0.1% THD,
< 0.9% THD
Audio Signal-to-Noise Ratio
Video Signal-to-Noise Ratio
Video Frequency Response
Yes
Yes
Yes
Both RF and integrated Telco Return capabilities
Yes
Yes
Enhanced Resolution Bitmapped Graphics (2/4/8 Bit)
20 Hz to 20 kHz
1 kHz
6 channels
6 channels
Yes
6 modes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Not Available on the DCP501
20 Hz to 20 kHz, +/- 1 dB
2x100Watts
5x100Watts
95 dB, A-weighted
> 57 dB (Digital), >49dB (Analog)
± 1 dB from 100 kHz to 4.2 MHz
DCP501 Installation Manual