Using The Dcp501 Digital Audio/Video Receiver; Changing The Dcp501 Tone Setting; Changing Balance And Fade On The Dcp501 - Motorola DCP501 Installation Manual

When DOLBY Pro Logic Surround is selected, the
When DOLBY 3 Channel Stereo is selected, the
When DTS Surround is selected, the
If a DSP sound mode is selected, the
S T A D I U M C O N C E R T
,
U s i n g t h e D C P 5 0 1 D i g i t a l A u d i o / V i d e o R e c e i v e r
This section describes:
!
How to change the tone setting
!
How to change balance and fade on the DCP501

Changing the DCP501 Tone Setting

Use this feature to define the bass and treble response. The factory setting is
is from –10 dB to +10 dB. To set the tone:
1
Press tone/level to display
2
Press select or ok and the current setting flashes.
Press cursor left/right (< >) to set the speaker bass response and press select.
3
4
Press tone/level twice to display
Press cursor left/right (< >) to set the speaker treble response and then press
5
Below are examples of what is displayed on the TV when you adjust the bass and treble
response on the DCP501.
On-sc r een Di spla y
B A S S :
T R E B L

Changing Balance and Fade on the DCP501

You can define the balance between left and right speakers, and between front and rear
speakers with the balance and fade settings. Balance and fade settings should only be used to
perform minor adjustments to the sound playback once the Speaker Test Tone Adjust has been
conducted. This must be performed while sitting at the listening position. Balance/fade
adjustments can reduce the maximum volume of the DCP501.
Balance and fade on the DCP501 are adjusted by attenuating the opposite set of channels. For
example, if you want the balance all the way to the right, the DCP501 and the on-screen display
B A L A N C E : L - 2 0
show
0 dB
setting is . The range for balance/fade is adjustable by up to
icon is displayed.
icon turns on and the sound mode is displayed:
T H E A T E R A R E N A
, ,
.
BASS
. Press select and the current setting flashes.
TREBLE
- 5 d B
E : + 1 0 d B
. Balance all the way to the left reads
O p e r a t i o n
icon is displayed.
icon is displayed.
C L U B C H U R C H
, , , or
B A L A N C E : R - 2 0
2 0 d B
.
D C P 5 0 1 I n s t a l l a t i o n M a n u a l
4 - 3 9
S T E R E O
.
0 d B
. The range
SELECT or OK .
DC P 501 D ispl ay
B A S S -
T R B L + 1
. The factory
5
0