Connecting To Cable Tv; Figure 3-4 Connecting To Cable Tv - Motorola DCP501 Installation Manual

3-6 Installation

Connecting to Cable TV

The DCP501 operates only with TVs with composite video or S-video capabilities. The DCP501
contains no RF output, so it will not function properly with older models of TVs with only RF
input.
Do not disconnect the cable connection between the RF In and To RF In ports. Removal of this
cable could disrupt operation of the DCP501.
IMPORTANT! The digital cable feature of the Motorola DCP501 can be activated only in
certain cable systems throughout North America. In cable systems where that feature cannot be
activated, you may connect an external cable receiver provided by the local cable provider. For
best results, connect an external cable receiver through the audio and video inputs on the back
of the DCP501.
CAUTION!
To avoid damaging the DCP501, do not use the cable connection between the RF In and To RF ports as a handle.
Connect the DCP501 for cable TV as shown in Figure 3-4:
Figure 3-4
Connecting to cable TV
Cable in
MODEL NO.: DCP 501
À LA PLUIE NI À L'HUM IDITE".
Cable(s) you will need:
RF (75 ohm) coaxial
DCP501 Installation Manual