Setting the Output of a Communication Report
This machine can automatically output a receiving/sending results report and a memory box
receiving/sending report.
NOTE
•
The Report Settings screen is made up of several screens. Use " " or "
screen and make the required settings.
•
When " " or "
Setting Automatic Output of a TX Report
The TX report enables you to check whether or not the documents were sent correctly to the
intended destination. A sending result report can automatically be printed after documents
are sent. You can also set the machine to print a TX report only when a transmission error
occurs.
NOTE
•
For an example of a Transmission report, see 'Appendix,' on p. 9-1.
•
The default setting is "For Error Only."
1
Call up the desired screen as follows:
TX Report
" should be pressed, the indication
(Additional
Functions)
is displayed in this manual.
(Custom Settings)
Setting the Output of a Communication Report
" to scroll to the desired
7-3
7