Setting The Batch Sending Memory Box - Canon 3300 Series Manual

Setting the Batch Sending Memory Box

The Batch Sending Memory Box enables you to send documents that have been read into it,
to a specific destination at a specific time each day. (See 'Using the Batch Sending Memory
Box,' on p. 3-12.)
By setting the sending time to a time when the communication charge is low, you can reduce
communication costs.
You can specify the following items for the Batch Sending Memory Box.
Setting item
Memory Box Name
Password
5
Destination
TX Start Time
An asterisk (*) indicates the default setting.
NOTE
•
If the party stored as the sending destination is not stored in the One-touch Speed Dialing memory,
store it there.
1
5-56 File Settings
Sets the memory box name.
Sets a password to control the memory box.
It is necessary to enter the password in
order to change the contents of the memory
box or to read an original to the memory
box, for example.
Sets the destination of the documents in the
memory box.
Sets the send starting time. The documents
in the memory box are automatically sent at
the specified starting time.
Call up the desired screen as follows:
(Additional
Functions)
Set contents Setting
Batch Sending*
You can enter up to 24
alphanumeric characters.
Not required
A one to seven-digit
number
Required
You can specify using the
Address Book and One-
touch Speed Dialing.
Required
No default setting*