Selecting The Type Of Telephone Line - Canon 3300 Series Manual

• Sender's Name (TTI)
- The name registered as the user's name is recorded.
• Destination Name (See 'Storing Various Dialing Functions,' on p. 5-13.)
- If you send an original using the one-touch speed dialing, coded speed dialing, or address
book functions, and a name is registered as the sending destination, that name will be
recorded.
• Page Number
- The total number of pages of the original is recorded.
NOTE
•
You can set the machine so that the sending record is not printed, even if each item has been
registered. (See 'Attaching a Transmission Terminal ID to the Document Being Sent,' on p. 5-5.)
•
If the machine is set so that the sending record is printed at the top of the recording paper on the
receiving side, and not all items are registered, only the registered items and the number of original
pages are printed.

Selecting the Type of Telephone Line

Set the type of telephone line connected to the machine.
If this setting is incorrect, you will be unable to communicate with another machine, so be
sure to check the type of telephone line you are using and make the correct setting.
NOTE
•
The default setting is "Tone."
1
Call up the desired screen as follows:
Tel Line Type
2
Select the type of telephone line, and press "OK."
NOTE
•
Press "Cancel" if you want to cancel your selection.
(Additional
Functions)
Things You Must Do Before Using This Machine
1
1-7