Canon 3300 Series Manual page 45

2
Make sure the machine is ready to send, and set the sending
conditions.
For details of the sending conditions, see the following:
- 'Setting the Resolution, Density, and Image Quality to Match the Original,' on p. 2-9
- 'Stamping Sent or Scanned Originals (Stamping Original),' on p. 2-17
- Chapter 3 'Special Fax Functions'
3
Specify the destination.
For details, see 'Various Dialing Methods,' on p. 2-19.
4
Press (Start).
The resolution, density, and image quality must be set after placing the original in the
feeder and before scanning.
NOTE
•
To cancel scanning, press "Cancel" on the touch panel display or
panel.
•
The available memory is displayed in the lower right corner of the screen.
When sending multiple originals by placing them on the platen glass:
Press (Start) for each document. Then press "Done" when the documents are
scanned completely.
(Stop) on the control
Selecting the Sending Method
2
2-13