Settings Relating To The Disk Configuration [Config] - Panasonic WJ-ND200K Setup Instructions

Settings relating to the disk configuration [Config]

The FORMAT button inside the front cover can be enabled/disabled and the hard disk drives can be formatted on
this page.
Important:
• When the "Config" page is displayed, all operations (recording, playback, etc.) except operations on this page will
stop.
• When exiting from the "Config" page, click the [Main] button. When the window is closed by clicking the [×] button
at the top right of the window, operation of the unit may become unstable.
Determine whether to enable or disable the FORMAT button inside the front cover
Screenshot 1
When the [Config] button is clicked, the authentication
window will be displayed.
Screenshot 2
The "Config" page will be displayed.
76
Step 1
Enter the administrator name and the password, and
then click the [OK] button.
Step 2
Select "ON" or "OFF" to determine whether to enable or
disable the FORMAT button inside the front cover.
When "ON" is selected, the FORMAT button will be
enabled.
Note:
Even when the "Enable format button" setting is
changed, the setting will not be applied until the
[SET] button is clicked.
Step 3
Click the [Main] button to exit from the "Config" page.