Panasonic WJ-ND200K Setup Instructions page 20

[FF] button
Fast playback will be performed. Playback speed for
fast playback will be changed in the following order
each time this button is clicked: Step2 (Approx. 4x) →
Step3 (Approx. 8x) → Step4 (Approx. 16x) →
Step5 (Approx. 32x) → Step6 (Approx. 48x) →
Step7 (Approx. 96x)
[PREV IMAGE] button
The previous frame will be displayed when this button is
clicked during playback/pausing.
[PAUSE] button
Playback will be stopped when this button is clicked dur-
ing playback. Playback will be resumed when this but-
ton is clicked during pausing.
[STOP] button
Stops playback and displays a live image.
[NEXT IMAGE] button
The next frame will be displayed when this button is
clicked during playback/pausing.
[Download (TO PC)] box
Downloads the image currently playing to a PC.
[Download] button
Displays the download setting window for download-
ing images.
Date and time of the download start/end points will
be displayed in the playback position operations
area.
[VIEWER] button
Clicking this button will start downloading the viewer
software that can play downloaded images.
[TEXT] button
The attached text information will be displayed when
this button is clicked during pausing.
[REC] box
The recording button, the recording stop button and the
SD memory data obtain button will be displayed when
the button is clicked.
The recording button, the recording stop button and the
SD memory data obtain button will be hidden when the
button is clicked.
20
SD memory data obtain button
Obtains recorded images on the SD memory card
on the camera. The letters "SD" on this button will be
displayed in red when the SD memory data is cur-
rently being obtained.
The letters "SD" on this button will be displayed in
blue when there is no recorded image on the SD
memory card. When this button is clicked while the
letters "SD" are displayed in blue, the unit will check
if there is any recorded image on the SD memory
card or not. When a recorded image is found, the
letters "SD" on the SD memory data obtain button
will turn red and obtainment of SD memory data will
start.
Recording button: Starts manual recording.
Recording stop button: Stops manual recording.
Important:
To display the recording button and the recording
stop button, hold down the
displayed.
Note:
When played image is in MPEG-4 format, results
from operating the some buttons will be as follows.
[GO TO DATE] button: Playback sometimes may
start from a point several seconds after the des-
ignated time and date.
[REV PLAY] button: Some frames of recorded
images will not be displayed. Reverse playback
will be performed with the set refresh interval of
the camera.
[PLAY] button (during playback): When the
[PLAY] button is clicked during playback, images
will be skipped for several seconds. (Playback
will starts from a point several seconds after the
current point.)
[PREV IMAGE] button: Some frames of recorded
images will not be displayed. Reverse frame play
will be performed with the set refresh interval of
the camera.
[FF]/[REW] button: Some frames of recorded
images will not be displayed. Fast playback/fast
reverse playback will be performed with the set
refresh interval of the camera.
[Download] button (during playback): Download
may start from a point several seconds later than
the designated start time and may end at a point
several seconds after the designated end time
when downloading MPEG-4 images.
button until they are