Panasonic WJ-ND200K Setup Instructions page 28

Setup items
I Language
Select the display language for the web browser from
the following.
JAPANESE/ENGLISH/FRANÇAIS/ESPAÑOL/
DEUTSCH/ITALIANO/RUSSIAN/CHINESE
I Time & Date
Adjust the current time and date.
Select numbers for year, month, day, hour and minute,
and click the [SET] button.
Important:
• Recording will not be performed for around 4 sec-
onds just after applying the time and date settings.
• Live images will turn to black screen and recording
will not be performed for around 4 seconds just after
applying the time and date settings even by shifting
to/from summertime (daylight savings).
I Port Setup
Perform the settings for the following items for each
port.
[DHCP]
Select ON or OFF to determine whether or not to use
the DHCP server. Select "ON" to obtain an IP address,
a subnet mask and a gateway from the DHCP server.
Set to "OFF" when entering the addresses above manu-
ally.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
Important:
• A different subnet should be set for each port.
• When ON is selected and the recording rate setting
for "SD MEMORY REC" is configured, an error may
occur in the process of startup of the unit when a
request to write onto the SD memory card is made.
This will happen when response from the DHCP
server takes time. However, this error will be correct-
ed once an address is provided to the unit.
[IP Address]
When "OFF" is selected for "DHCP", enter an IP
address. For this unit, enter 4 units from the decimal
numbers (0-255) according to the network configuration.
28
[Subnet Mask]
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
[Gateway]
Enter the IP address of the gateway according to the
network environment when "OFF" is selected for
"DHCP".
[Line Speed]
The following are available for "Line Speed".
AUTO: Line speed will be applied automatically.
10-HALF: 10 Mbps semi duplex
10-FULL: 10 Mbps full duplex
100-HALF: 100 Mbps semi duplex
100-FULL: 100 Mbps full duplex
Important:
The line speed settings should be the same between
the unit and the hub.
(Recommended line speed: 100Mbps-FULL)
For example, when 100Mbps-FULL and 100Mbps-
HALF are set for the recorder and the hub respec-
tively, display/recording/playback of images may not
be performed correctly.
Note:
When the setup menu is closed after changing the
line speed, the unit will automatically restart.
I Camera Auto Registration
The unit will search cameras and register the detected
cameras automatically. Determine how to register IP
addresses of cameras.
Register the IP address automatically given by this
unit to a detected camera: When a camera is
detected, the unit will give an IP address to the
detected camera and register it.
Register the IP address set with a detected camera:
When a camera is detected, the unit will register the
IP address of the detected camera.
Notes:
• When "Camera Auto Registration" is carried out, the
other login users will be forcibly logged out.
• Recordings currently being carried out on this unit
will stop in the process of "Camera Auto
Registration".