Panasonic WJ-ND200K Setup Instructions page 53

Settings of the sequential display of images from cameras [Sequence Setup]
Perform the settings for the sequential display of live images.
Screenshot 1
Click the [Camera] button in the "Setup" panel and then
click the "Sequence Setup" tab. The "Sequence Setup"
page will be displayed.
Setup items
[The Method of Sequence]
Select "SPOT" (single screen) or "4 Screens" for "The
Method of Sequence".
Default: SPOT
[SPOT Live Sequence]/[4 Screens Sequence]
When the [SETUP] button for the selected method is
clicked the following window will be displayed. Perform
the settings on this window. Click the [SET] button after
completing the settings, and close the window by click-
ing the [×] button at the top right of the window.
Step 1
Edit the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Note:
When the image compression method of the camera
selected for a camera channel is "MPEG-4", the
respective sequence step will be skipped.
[CAM]
Select a camera whose images are to be displayed at
each step from the following.
- -: Skips the selected step.
CAM1 - 16 (when "SPOT" is selected): Switches
images from the selected camera channel on a sin-
gle screen (SPOT), starting from "STEP1".
4A - 4D (when "4 Screens" is selected): Switches
images of the preset camera groups (4A - 4D) of 4
channels in sequence on a 4-Screen, starting from
"STEP1".
53