Panasonic WJ-ND200K Setup Instructions page 70

Setting of operation level [User Level]
Assign a level (LV1/LV2/LV3/LV4) to every user to restrict operable functions.
Screenshot 1
Click the [User Mng.] button in the "Setup" panel and
then click the "User Level" tab. The "User Level" page
will be displayed.
70
Step 1
Check the desired functions that a user may operate. To
stop a user from operating certain functions, do not
check the respective function.
Refer to page 71 for further information about each
function.
Step 2
Click the [SET] button after completing the settings.
Note:
Each parameter of user level is as follows:
LV1: Possible to perform all the operations
(Administrators)
LV2: Possible to refer to the settings of the unit and
the access log, and to perform the alarm reset
(Head of operators)
LV3: Possible to monitor or play the images
(Operators)
LV4: Possible to monitor live images (Operators)