Panasonic WJ-ND200K Setup Instructions page 60

Settings for the time adjustment of a network [NTP Setup]
Screenshot 1
Click the [Comm] button in the "Setup" panel and then
click the "NTP Setup" tab. The "NTP Setup" page will be
displayed.
60
Step 1
Perform the following setup items.
I Time Adjustment
Select "ON" or "OFF" to determine whether or not to
adjust the time according to the NTP server.
Default: OFF
I NTP Server Address
Enter the NTP server address when adjusting the time
using the NTP server. Enter up to 255 alphanumeric
characters including hyphens (-) and periods (.).
I Time Adjustment Method
Select the update method from the following.
Periodic: The recorder will update the clock periodically
by inquiring to the NTP server.
Scheduled: The recorder will update the clock at the
designated time.
I Refresh Interval
Select an interval of time inquiry to the NTP server from
the following.
1h/2h/6h/12h/24h/
Default: 1h
I Refresh Time
When selecting "Periodic" for "Time Adjustment
Method", determine the time for the time inquiry.
Step 2
Click the [SET] button after completing the settings.
Notes:
• The clock will be adjusted using the NTP server
when the clock of the unit becomes inaccurate
beyond ±5 seconds.
• The clock will not be adjusted when event recording
is being performed on any camera channel or when
emergency recording is being performed.