Perform The Settings For The System [System] - Panasonic WJ-ND200K Setup Instructions

Perform the settings for the system [System]

Perform the settings for the system of this unit.
Perform the basic settings for the system [Basic Setup]
Perform the settings for the basic operations of this unit.
Screenshot 1
Click the [System] button in the "Setup" panel then click
the "Basic Setup" tab. The "Basic Setup" page will be
displayed.
Setup items
I Recording
Select "ON" or "OFF" to record or not record.
OFF: No recording will be performed.
ON: Recording will be performed.
Default: ON
I Language
Select the display language for the web browser from
the following.
JAPANESE/ENGLISH
Default: ENGLISH
I Monitor Display
It is possible to allocate camera channels to each sec-
tion of a 4-Screen when displaying images on a 4-
Screen. It is necessary to perform the settings of the
camera group for the sequential display on a 4-Screen
(4A - 4D).
30
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
The following window will be displayed when the
[SETUP] button is clicked. It is possible to allocate 4
camera channels to each section (4A - 4D). Images
from the selected camera channel will be displayed in
the respective section of a 4-Screen in the image dis-
play area.
Click the [SET] button after completing the settings, and
close the window by clicking the [×] button at the top
right of the window.