Panasonic WJ-ND200K Setup Instructions page 45

Setup items
I Copy the other Time Table
When it is necessary to copy the timetable of another
day of the week, select the desired day of the week and
click the [Copy] button.
I Program Setup
The program can be edited on the program setting win-
dow displayed by clicking the [View] button after select-
ing a program from the pull-down.
I PERIOD
Perform the following settings for each time zone.
[START]
Set the start time for the selected time zone.
[END]
Set the end time for the selected time zone.
[Program]
Select a program to be activated for the selected time
zone.
[FTP SEND BY PERIODIC TIMER]
Perform the "FTP Send by Periodic Timer" settings of
the setup menu ("Comm" – "FTP Setup") first ( page
61), and select "ON" or "OFF" to determine whether or
not to send images to the FTP server periodically.
[FTP ALARM SENDING]
Select "ON" or "OFF" to determine whether or not to
send images to the FTP server at an event occurrence.
( page 62)
[ALARM MESSAGE]
Select "ON" or "OFF" to determine whether or not to dis-
play the pop-up window that notify of an alarm occur-
rence with a message when an alarm occurs.
[Panasonic Alarm Protocol]
Select "ON" or "OFF" to determine whether or not to
notify of an alarm occurrence to a PC according to the
"Panasonic Alarm protocol" of the setup menu ("Comm"
– "Panasonic Alarm protocol") ( page 64).
To receive a notification and display the contents of the
notification, the optional software is necessary.
[ALARM MAIL]
Select "ON" or "OFF" to determine whether or not to
send an alarm mail at an event occurrence.
Refer to page 63 for descriptions of how to use the mail
function such as the settings of the mail server address
and the mail address of the recipient. Refer to the oper-
ating instructions (PDF) for further information about the
contents of the alarm mail.
Notes:
• The start time and end time can be set in 1 minute
intervals. (The end time should be at least 15 min-
utes later than the start time.)
• Time from "23:46" to "23:59" are unavailable for the
start time.
• To copy a timetable that is set for a different day of
the week, select "Copy the Other Time Table" and
select a day of the week in step 2.
• Repeat steps 1-4 to set programs of another day of
the week.
45