Changing Initial Settings; Common Procédures - Panasonic DVD-CV50 Operating Instructions Manual

Advanced Operations a
Numeric buttons
ACTION
@<iDise Languages)
© 2 Ratings Level 8a
Gal 3 Menu Language English
Ga} 4 On-Screen Messages
GD 5 FL Display
Qf 6 TV Aspect
WL 7 Digital Audio Output
(A. .8 Speaker Setting
9 Other Settings
Press RETURN to exit
2-channel
ROTS455 |
i
|
1
| Changing initial settings
Change the initial settings to suit your preference and to suit the unit
to the environment in which it is being used.
Common procedures
{1 Press [ACTION] in the stop mode.
The initial settings screen is displayed.
2 Press the cursor buttons [A, V] to se-
lect the item and press [ENTER].
Each item that can be modified is displayed.
1 Disc Languages {= page 31)
Change the soundtrack language, subtitle language and
the language used in the disc's menu to be used for every
disc played-
2 Ratings (= page 32)
Change the ratings level to prevent play of discs, skip vio-
lent scenes, or replace scenes with others by entering a
password. This is also called a parental lock.
3 Menu Language (™ page 33)
Change the language used for the on-screen displays and
initial settings menus.
4 On-Screen Messages (= page 33)
Choose whether "Play", "Still" and other displays will be
displayed or not, and the color and position of these dis-
plays as well as On-Screen Menu Icons.
5 FL Display (œ page 33)
Change the brightness for the FL display.
6 TV Aspect (= page 11)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (= page 40)
Change the settings to suit the type of digital equipment
you have connected.
8 Speaker Setting ( page 42)
Change the settings to suit the type of speaker you have
connected. i l
9 Other Settings ( page 34)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing expe-
rience.
3 Press the cursor buttons [A, V] to se-
lect the setting and press [ENTER].
Some items require additiona! steps.
(See the respective page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [ACTION] or [RETURN].
For your reference
The numeric buttons can also be used instead of the cursor buttons
[&, ¥j for selecting items or settings. Pressing [ENTER] is not nec-
essary.