Panasonic WJ-ND200K Setup Instructions page 66

Edit information of the registered administrator [Administrator Setup]
It is possible to edit the registered administrator information such as the password, default screen, etc.
Screenshot 1
Click the [User Mng.] button in the "Setup" panel and
then click the "Administrator Setup" tab. The
"Administrator Setup" page will be displayed.
Setup items
I Administrator Name
It is possible to edit the name of the administrator. Enter
4 to 14 alphanumeric characters for administrator name.
I Password
Enter a password. Enter 4 to 8 alphanumeric characters
for administrator name.
Note:
To enhance the security, change the password for
an administrator periodically.
I Level
Displays the operational level of the user. The user level
of the administrators is "LV1" and it is impossible to
change it.
I Priority
Display the settings to assign priorities to operate this
unit in case two or more users access this unit simulta-
neously.
The priority of the administrators is "0" and it is impossi-
ble to change it.
66
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Important:
• The administrator information can be edited only
when logging in as the administrator.
• When the unit is being operated without changing
the default administrator name and password, the
pop-up window saying that it is recommended to
change the password will be displayed.
I Default Screen
Select a startup display to be displayed after login from
the following.
CAM1 - 16: Displays live images from the selected cam-
era channel on a single screen.
4A - 4D: Images of the camera group (4A - 4D) consist-
ed in advance from 4 camera channels will be dis-
played on a 4-Screen.
The settings for 4-Screen can be configured on the
"Monitor Display" page ("System" – "Basic Setup" –
"Monitor Display" ( page 30).
SEQ: Images will be displayed in the sequential display.
The operational settings of the sequential display
can be performed on the "Sequence Setup" window
("Camera" - "Sequence Setup").
I Camera Partitioning
Display a controllable range for each camera channel.
The camera partitioning setting of the administrators is
"View/Operate" and it is impossible to change it.
View/Operate: Both displaying live/recorded images
and controlling cameras are possible.