[Control] Button - Panasonic WJ-ND200K Setup Instructions

[Control] button

When the [Control] button is clicked, the "Control" panel will be displayed.
"Control" panel
[Multiscreen Select] box
Up to 4 camera images can be displayed simultaneous-
ly on a 4-Screen.
Each time the button is clicked, the camera picture is
changed to quad display according to the settings made
in the "Monitor Display" page ("System" – "Basic Setup"
– "Monitor Display").
[Sequence] box
Camera images to be displayed will be switched by
clicking this button. Camera images will be displayed
sequentially according to the settings performed in
advance.
The indicator on the button lights (green) during
sequence operation.
[EL-Zoom] box
Camera images will be displayed in the proportion of the
clicked zoom ratio button.
: 1x : 2x
[Search] box
The recording event search window will be displayed by
clicking this button. Use this button to search the record-
ed images. (Refer to the operating instructions (PDF).)
Search results will be displayed in list form in the log
display area. (Refer to the operating instructions (PDF).)
[Log] box
[Error Log] button: The error logs of this unit
will be displayed. Logs will be displayed in list form
in the log display area.
[Access Log] button: The time when logged
in/out for this unit, the user ID, or the IP address will
be displayed. Logs will be displayed in list form in
the log display area.
[Event Log] button: The event logs (event
occurrence times and their details) will be displayed.
Logs will be displayed in list form in the log display
area.
[Network Log] button: The network error logs
will be displayed. Logs will be displayed in list form
in the log display area.
[Zoom In]: Enlarges the live camera image
and playback picture.
: 4x
15