Panasonic WJ-ND200K Setup Instructions page 61

Settings for the FTP server [FTP Setup]
Settings for transmitting images from a camera connected to this unit to a designated FTP server periodically can be
performed with the "FTP Setup" menu.
Screenshot 1
Click the [Comm] button in the "Setup" panel and then
click the "FTP Setup" tab. The "FTP Setup" page will be
displayed.
Setup items
I FTP Server Address
Enter an address or name of the FTP server as a desti-
nation of images. To enter an FTP server name, it is
necessary to select "MANUAL" or "AUTO" for "DNS".
Enter up to 255 alphanumeric characters including
hyphens (-) and periods (.).
I User Name
Enter a user name (login name) to access the FTP serv-
er. Enter up to 32 alphanumeric characters. The avail-
able characters are the characters listed below except
(&) and blank (space).
About the NTP server function
• This unit can be used as the NTP server for the con-
nected cameras. Set "123" for the port number on
the camera. Refer to the operating instructions of the
camera for how to perform the settings of the cam-
era.
• Time adjustment using the NTP server is unavail-
able for cameras with different subnet.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
I User Password
It is necessary to register a password when sending
images to the FTP server. Enter up to 32 alphanumeric
characters listed on the next page.
An entered character for the password will be displayed
as "*" or "•".
I Mode
Select a mode for sending images to the FTP server.
Change to "PASSIVE" when sending images is difficult
with "ACTIVE".
Default: ACTIVE
61